Yamaha RSio64-D Interface driver for Windows 7 - Yamaha RSio64-D Interface driver from Yamaha for

Yamaha RSio64-D Interface 3.10

Yamaha RSio64-D Interface driver from Yamaha for OS Independent

Yamaha RSio64-D Interface driver from Yamaha for OS Independent

Publisher review for Yamaha RSio64-D Interface 3.10:

Before install Yamaha RSio64-D Interface 3.10you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Yamaha RSio64-D Interface . We recommend to always use most recent version of a driver.

This package contains the necessary installation files of Yamaha RSio64-D Interface Firmware 3.10.Enhancements:
- You can remotely control one RSio64-D unit from a maximum of two CL/QL/R Remote units.
Fixes:- Solved a problem in which the correct static IP address is not assigned even if STATIC IP (MANUAL) is selected.
Installation steps:
1. Connect the computer to the network which RSio64-D is connected.
2. Turn on the power of all RSio64-D devices which are to be updated.
3. Quit the NUAGE Workgroup Manager f if it is running. It is necessary to quit the NUAGE Workgroup manager beforehand since the RSio-D Update Program cannot be launched while NUAGE Workgroup Manager is running.
- Windows: Right-click the NUAGE Workgroup Manager icon in the system tray and select Quit.
- Mac: Click the NUAGE Workgroup Manager icon in the menu bar and select Quit.
4. Double click “RSio64-D Update Program.” The RSio64-D Update Program will start up.
- The “User Account Control” dialog box may appear. Click [Continue] or [Yes].
- RSio64-D Update Program may be blocked by the Windows Firewall. Check the all check boxes, and click [Allow access].
- In Mac, the confirmation dialog box which accepts incoming network connections from an application may appear. Click [Allow].
5. Make sure that the fields in the “File” section indicate as follows:
- File name: RSio64-D_firmXXX.prg
- Product name: RSio64-D
- Version: X.XX
- The characters “XXX” and “X.XX” represent the firmware version number which will be updated.
- If these fields are empty, click [Select], and select the “RSio64-D_firmXXX.prg.”
6. Select the target RSio64-D for updating in “Product name” in the “Connect and Update” field.
- If this field is empty, your computer may not be properly connected to the RSio64-D. Make sure that the cable is not disconnected or damaged, and that the program is not blocked by a firewall.
- Each RSio64-D that is operating in NUAGE system is displayed in gray. To update the RSio64-D, check NUAGE Workgroup Manager running on another computer, and remove the RSio64-D from the Workgroup.
7. Click [Update]. The progress log and progress bar are displayed on the lower area in “Connect and Update.”
8. An “Updated successfully” message will be displayed once update is completed, and the RSio64-D restarts automatically.

Operating system:
OS Independent